Beer Kegerator Tower Cooler

Description

Wasted Beer = Wasted Money
By using our Beer Tower Cooler you can solve your beer foaming problems.
This tower cooler uses a small fan to force cold air from your kegerator into the space inside the tower that supports the tap.  By keeping the tap and shank cold, the beer does not foam between servings.
Works with any kegerator with a 3″ or larger diameter beer tower – home built or store bought.
Works with homebrew beer or draft beer.
Works with commercial or homebrew beer kegs.
Install is simple with no tools needed:
Unpack your beer tower cooler.
From inside your kegerator, push the open end of the cooler hose into your beer tower until it bumps into your beer shanks and stops.
Zip-tie the beer tower cooler air hose to your beer line with the included zip-tie so it does not fall out.
Locate the fan and so that it’s not touching anything inside your kegerator – this way it will be silent and not make any noise.
Plug the power supply into a wall outlet or extension cord.
Run the thin power cable past the kegerator door gasket and plug into the Beer Tower Cooler.
For a cleaner looking install, you may want to run the power cord through a small hole you drill through the side or back of your kegerator. Be careful to avoid refrigerant lines if you decide to drill through the side or back of your kegerator.
If you aren’t sure, don’t drill!!!!